From Clay to
Production-Ready
in Days, Not Months
High-precision CNC prototypes, EV battery housing models, interior trim mock-ups, and full OEM automotive component runs — for Tier 1 suppliers, EV startups, and global car brands. Design validation cycles in few days.
Automotive Parts — Straight Off Our Machines
Why Automotive OEMs Can’t Ship Without Prototyping
Exterior Styling Validation
Full-scale door panels, bumper fascias, grille surrounds, and mirror housings — machined to Class A surface tolerances to validate styling lines and gap flushness before production tooling investment.
Interior Cabin Verification
Dashboard trim assemblies, centre console mock-ups, door card panels, and HVAC duct forms. Confirm fit, feel, colour match, and texture before committing to injection mould tooling.
EV Battery & Powertrain EV
Battery module housings, BMS enclosures, motor mounts, and inverter brackets. Lightweight AL6061 / AL7075 structures verified for thermal, vibration, and IP67 sealing requirements before production.
Chassis & Suspension Geometry
Control arms, knuckles, subframe brackets, and anti-roll bar mounts. CNC prototypes confirm geometry tolerances and clearances within the wheel arch before casting commitments.
Lighting & Sensor Integration
Headlamp housings, tail-light bezel inserts, LiDAR / radar brackets, and camera mounting structures. Precision bore positions for optical alignment, verified before production moulds are cut.
NDA-Protected Design Security
Next-generation platform designs are your most sensitive IP. We sign mutual NDA before any CAD review. Your platform architecture, powertrain layout, and styling data remain fully confidential.
Automotive & EV Prototype Applications
From supercar styling bucks to battery-electric platform components — IDMockup produces the precision prototypes, appearance models, and production-intent parts that global automotive OEMs trust across every stage of the vehicle development cycle.
Body Panels & Styling Bucks
Full and partial styling buck sections, A-surface door skins, bonnet panels, and rear fascia mock-ups. CNC foam, urethane, or aluminium toolboard to production-intent surface quality for VAVE reviews.
Interior Trim & Console
IP (instrument panel) carriers, centre console tubs, door armrests, pillar trims, and HVAC bezels. ABS, PP, PC/ABS toolboard or injection-moulded in 48–72h for HMI ergonomic trials.
EV Battery System EV
Cell module trays, battery pack lower trays and lids, BMS connector housings, and cooling plate manifolds. AL6061 with IP67-verified seal groove geometry — EMC shielding cutouts on request.
Powertrain & Drivetrain
Motor adapter brackets, gearbox bell housing prototypes, axle shafts, differential covers, and exhaust manifold models. SUS304 or AL7075 high-strength prototypes for assembly and thermal validation.
Chassis, Suspension & Brake
Aluminium control arms, knuckle prototypes, subframe nodes, brake caliper carriers, and rotor blanks. Structural prototypes for geometry confirmation, not load testing — with full CMM dimensional reports.
Lighting & ADAS Housings
Full headlamp back-housing assemblies, tail-light frames, LiDAR radome brackets, front and rear radar mounts, and 360° camera housing arrays — all to ±0.05mm optical bore positioning.
Every Process Automotive Needs — Under One Roof
5-Axis CNC
Complex automotive surfaces, undercuts, and Class A finish. AL7075-T6, SUS304, toolboard, and engineering plastics to ±0.05mm. Single-setup arm segments and structural members.
Learn more →Sheet Metal
Laser-cut, press-bent, and welded AL5052 / SUS304 for BEV battery trays, door inners, structural brackets, and chassis nodes.
Learn more →SLA / SLS 3D Printing
48-hour interior trim, lighting bezel, and sensor bracket concepts for ergonomic and fitment reviews before hard tooling.
Learn more →Vacuum Casting
10–50 piece soft-mould runs for seals, grommets, gaskets, and flexible body cladding. Shore A/D matched to OEM specification.
Learn more →Injection Moulding
Trim clips, bezel panels, duct connectors, and grommet sets. Soft tool from 50 pcs for pre-production builds; hard tool for SOP volumes.
Learn more →CMF & Surface
Hard anodize, powder coat, texture painting, PVD, electropolishing, and Class A paint prep. In-line Pantone and RAL colour matching.
Learn more →Aluminium Die Casting
ADC12 / AL6061 structural brackets, gearbox housings, and thermal management components for production-intent weight simulation.
Learn more →CMM Dimensional QC
Zeiss / Renishaw CMM inspection for GD&T callouts, surface profiles, and flush-and-gap measurements. Full dimensional report on every build.
Learn more →OEM-Grade Materials —
Automotive Qualified
Automotive prototypes must match production parts in weight, stiffness, thermal behaviour, and surface quality. We stock and machine every alloy and engineering polymer grade your platform development demands.
Structural body and chassis prototypes default to AL7075-T6 for strength-to-weight. EV battery trays in AL6061-T6 with laser-welded joints. Interior trim in ABS-PC for texture fidelity. Thermal management plates in AL6061 with friction-stir or TIG weld options. Gaskets and seals from Shore 40–80A silicone.
From STEP File to Validated Part — 5 Steps
Upload & RFQ
Submit STEP / IGES / PDF. Detailed quote with material, finish, and lead time within 24 hours.
DFM Review
Engineers assess undercuts, draft angles, GD&T callouts, and CMF feasibility before committing.
Machine & Fabricate
5-axis CNC, sheet metal, or 3D printing begins. Real-time progress updates to your PM.
CMF & Marking
Anodize, powder coat, texture paint, laser engrave, or pad print per drawing callouts.
CMM & Ship
Full CMM dimensional report, first-article inspection, DHL / air freight to your test lab globally.
Trusted by Global Automotive, EV & Electronics OEM Leaders
Your Next Vehicle Platform
Starts With a Physical Part
Send us your CAD, reference sketches, or even a napkin drawing. Our automotive engineering team responds with a detailed quote — material recommendations, CMF options, and lead time — within 24 hours. NDA signed before any file review.
Automotive Prototype & EV Component Manufacturing — IDMockup Singapore
IDMockup is Asia’s precision engineering partner for the automotive industry, delivering CNC-machined prototypes, EV battery housing models, styling bucks, and OEM production runs for Tier 1 suppliers, EV startups, and global car brands. Headquartered in Taipei, Taiwan, with manufacturing in Dongguan, Kunshan, and Thailand, IDMockup serves automotive prototype Singapore, Japan, and Thailand programmes for leading automotive OEMs. Our precision engineering Singapore capabilities cover 5-axis CNC for body and chassis structures, EV battery module housings, interior trim assemblies, lighting and ADAS sensor housings, and production-grade die-cast components. Materials include AL7075-T6, AL6061-T6, SUS304, ABS-PC, PP-GF30, and PA66-GF30, with finishing including hard anodize, Class A paint prep, texture coat, and PVD. As a trusted model making company Singapore, auto parts prototype provider, and CNC machining Singapore partner, IDMockup supports design validation, OEM supplier qualification, investor showcase models, and mass-production launch across the full vehicle development cycle. From a single rapid prototype to 1,000-piece OEM component runs, IDMockup is your complete automotive mockup Singapore solution.